OEM Fabrication Cast Steel for Punch And Die Tooling

The castings are molds for pipe fitting.

We make them for our Russian customers with finished machining.

Mechanical property

Mechanical test result shows an evaluation of the metal according to customers’ requirement.

Ultrasonic test

Ultrasonic test gives an guarantee of the inside quality of the large steel castings.

A qualified UT tester will do the test with normal probe according to customers’ UT level.

The sound can detect the internal defects of the large carbon steel and alloy steel castings.

Sound waves will change according to the internal structure.During UT process,the high frequency acoustic energy is transmitted into the casting.

It travels via the casting until it hits the opposite surface,interface or defects.The interface or defects reflect portions of the energy which are collected and displayed on the test machine(the depth,width and thickness).

Magnetic powder inspection

It is not easy to find the tiny cracks,pores and other surface glitches on the large carbon or alloy steel castings by human eyes.In this situation,a colored dye solution is applied to the surface of the casting.

In general, dye-penetrant techniques identify defects on the surface of the casting and do not detect internal porosity or shrinkage that is not open to the surface. But it can detect rounded indications for porosity or gas on the casting surface.

Magnetic powder inspection is a quick,economic and sensitive way to find the surface defects on the large carbon or alloy steel castings.

UT and MT level 3 to guarantee the quality.

1)The engineer will firstly prepare the technology and do a simulation before pouring.

2)We will make a pattern of the kiln tyre based on engineer's technology.

It will cost us around one week.

After that the engineer will check the dimension and make a record.

3)Sand molding making will be made by experienced wokrers.

4)Pouring and cooling.

There are one 8tons electrical arc furnace;

Two 50 tons medium frequency furnace;

One 120 tons refining furnace and one 120 tons VD furnace;

5)Clean the sand and cut the riser before heat treatment

6)Heat treatment will cost 7days( 4 days normalizing and 3 days tempring).

There are 8 heat treatment furances with max. one is 12m*9m*6m.

7)dimension check and draw a line for machining.

8)Rough machining

9)NDT withe qualified inspector

10)Welding repair if needed and tempering for stress relief

11)Final machining and NDT

12)Customers' inspection and packing

Haian Haitai Casting Co.,Ltd. is established in 2003. 

We supply large steel castings with low carbon or alloy steel from 3 tons to 150 tons per piece.

With a quick development,now we had supplied steel castings 6,000 tons per month.

There are three workshop for sand mold making,one workshop for machining and one for post procedure.

Our main products are for cement mill(around 30%).

We supply around 400pcs kiln tyres,170 sets of ring gears and 930pcs supporting rollers a year.

We also have rich experience of the castings for shipbuilding with 9 class certificate.

In 2018,we started to get orders from Russia for the stamps.

After the trial order,we make more and more stamps for our Russian customer.

The surface hardening is done by customers' themselves.

Most of the material is ZG270-500,

some foring ones is 5CrNiMo.

We do the test according to diffrent production step,

such as chemical composition,UT,MT and mechanical property.

In 2021,Haitai inspection and testing center got approval from CNAS.

Our company is near to Shanghai port and we can supply different packing according to customers' specification.