|Material Standard||GB, EN, DIN, ASTM, GOST, JIS, ISO|
BS 060A35/AISI 1035
GE300/C35/GS-45/BS 060A35/AISI 1035
C45/GS-52/BS 080M40/AISI 1045
GS-34 CrMo4V/BS 708A37/AISI 4137:4135
GS-42/CrMo4V BS 708A37/AISI 4140/SCM440(H)
34CrNiMo6/BS 817M40/AISI 4340
BS 060A52/S50C/AISI 1050
|No. ||Equipment Name ||Quantity(Set)|
|2||Full set of wooden molding equipment||10|
|3||Sodium silicate sand mix line||4|
|4||Alkaline phenol resin sand mix line||2|
|5||25 tons Electric arc furnace||1|
|6||50 tons Intermediate frequency furnace||2|
|7||120 tons Refining furnace||1|
|8||120 tons VD furnace||2|
|9||12m*9m*6m Heat treatment furnace||3|
|10||120 tons Large-scale shot blasting machine||1|
|11||150 tons Travelling crane||2|
|12||125 tons Travelling crane||3|
|13||200 tons Travelling crane||2|
|14||CNC gantry boring and milling machine||2|
|15||2.5m-10m Digital vertical lathe||16|
|16||Boring and milling machine||13|
|18||Large dust removal equipment||7|
1)The engineer will firstly prepare the technology and do a simulation before pouring.
2)We will make a pattern of the matrix tee based on engineer's technology.
It will cost us around one week.
After that the engineer will check the dimension and make a record.
3)Sand molding making will be made by experienced wokrers.
4)Pouring and cooling.
There are one 8tons electrical arc furnace;
Two 50 tons medium frequency furnace;
One 120 tons refining furnace and one 120 tons VD furnace;
5)Clean the sand and cut the riser before heat treatment
6)Heat treatment will cost 7days( 4 days normalizing and 3 days tempring).
There are 8 heat treatment furances with max. one is 12m*9m*6m.
7)dimension check and draw a line for machining.
9)NDT withe qualified inspector
10)Welding repair if needed and tempering for stress relief
11)Final machining and NDT
12)Customers' inspection and packing
Haian Haitai Casting Co.,Ltd. is established in 2003.
We supply large steel castings with low carbon or alloy steel from 3 tons to 150 tons per piece.
With a quick development,now we had supplied steel castings 6,000 tons per month.
There are three workshop for sand mold making,one workshop for machining and one for post procedure.
Our main products are for cement mill(around 30%).
We supply around 400pcs kiln tyres,170 sets of ring gears and 930pcs supporting rollers a year.
We also have rich experience of the castings for shipbuilding with 9 class certificate.
We supply stamps for Russian companies since 2014.
At the beginning we supplied a trial order around 25 tons.
We can't do surface hardening.
|No. ||Equipment Name||Quantity(Set)|
|1||Sand analysis equipment||1|
|2||Impact sample low temperature meter||1|
|3||Direct reading spectrometer(OXFORD)||2|
|5||ZEISS metallurgical microscope||1|
|6||Pendulum impact tester||1|
|7||Microcomputer controlled electro-hydraulic servo universal test machine||5|
|8||Various hardness tester||4|
|9||Magnetic defect detector||5|
|10||Ultrasonic flaw detector(digital)||1|
|11||CX-52 Total station||1|
|12||Stylus roughness meter||1|
We do the test according to diffrent production step,
such as chemical composition,UT,MT and mechanical property.
In 2021,Haitai inspection and testing center got approval from CNAS.
Magnetic powder inspection
It is not easy to find the tiny cracks,pores and other surface glitches on the large carbon or alloy steel castings by human eyes.In this situation,a colored dye solution is applied to the surface of the casting.
In general, dye-penetrant techniques identify defects on the surface of the casting and do not detect internal porosity or shrinkage that is not open to the surface. But it can detect rounded indications for porosity or gas on the casting surface.
Our company is near to Shanghai port and we can supply different packing according to customers' specification.